Specifications

Installer’s Guide – Endurance six™
8
Part No: IG090701
Version: B

Installation of
Shower Remote Control
• Drill a hole (more than diameter
about 12mm) in a wall for the
remote controller cables.
• After passing the remote controller
cables through the hole, remove
the packing’s back paper of remote
controller. Then attach the remote
controller to the wall.
• Detach both end covers of remote
controller and x the remote
controller to the wall with wood
screws (2 pcs) in the screw holes
provided. (You can detach the
covers with catching the bottom
corner’s slot with nail.)
• Do not tighten the screws
excessively, as the screw hole may
be damaged. In case of mounting
the remote controller on tile, cement
or mortar, use an expansion bolt.
Installation Guide
Shower Remote Control
Model YST-2252
Wood screw
Cover
Cover
Expansion bolt
Remote controller cables
Remote controller
packing
Remote controller
cables
Wood screw
Cover
Cover
Expansion bolt
Remote controller cables
Remote controller
packing
Remote controller
cables