User Manual

7
19) SPEAKER OUTS – You can connect an extension speaker cabinet to this combo using a 1/4” speaker cable (do not use an
instrument cable). These outs are in parallel, the combo’s internal speaker impedance is 16 ohms, and the total minimum load is 4 ohms. So
before connecting an external speaker, make sure its impedance is not less than 6 ohms.
20) AC POWER SOCKET – Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any
injury to the user or damage to the unit. DV Mark amps and combos are manufactured to be used in the country where they have been sold,
and are factory preset to that country’s voltage. So make sure you’re sending the correct voltage to your amp before you connect it to AC power.
REAR PANEL
19
20