V.30.April.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
MARK VISION A Word from Marco De Virgiliis Thank you for choosing the DV MICRO head! In the years i made Markbass a world leader brand in the bass amps segment, using technology to better serve bass players needs: great tone, reliability, versatility/flexibility and light weight.
FRONT PANEL - DV MICRO 60 - DV MICRO 60 CMT INPUT Connect your guitar to this input using a standard ¼” shielded instrument cable. It’s also designed to perfectly interface with all the effects most used by guitarists. LEVEL This knob sets the input level, turn it up gradually until you reach your desidered volume. BASS This knob controls the amount of low frequencies in your sound. MID The Middle control regulates the midrange frequencies and it is an important part of your tone shaping.
FRONT PANEL - DV MICRO 60 - DV MICRO 60 CMT DV MICRO 60 DV MICRO 60 CMT 5
REAR PANEL - DV MICRO 60 - DV MICRO 60 CMT AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user or damage to the unit.
TECHNICAL SPECS - DV MICRO 60 - DV MICRO 60 CMT Channels: Two (clean / lead) BLOCK DIAGRAM Controls: Level (clean ch) Drive / Level (lead ch) EQ Controls: Bass - Mid - High (clean ch) Bass - High (lead ch) Speaker Outputs: Two ¼” Jacks mono out 8 ohm Power Output: 60W @ 4ohm / 50W @ 8ohm Other Features: Footswitch input for channels switch AUX IN Headphones OUT XLR Line OUT with GND Lift Dual Voltage selector 120V/240V (not available on the 100V version m
Product specifications are subject to change without notice www.markbass.it Parsek srl - Italy - 66020 San Giovanni Teatino CH - Via Po, 52 Tel: +39 0854407764 / 0854465705 - Fax: +39 0854407764 / 0854407399 - www.dvmark.it - info@dvmark.
