Manual

6
REAR PANEL
9) SPEAKER OUTS One 4 ohm and one 8 ohm jack are provided for speaker connections. Verify the impedance of your speaker cabinet
to make sure you connect it to the right speaker output. If you want to use the amp with two 8 ohm cabs (a 4 ohm load) connect one cabinet
to the 4 ohm jack, and connect the two cabinets together with another speaker cable. For two 16 ohm cabinets, connect to the 8 ohm jack and
connect the two cabinets together.
10) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power cord must be connected to avoid any
injury to the user or damage to the unit. DV Mark amps and combos are manufactured to be used in the country where they have been sold,
and are factory preset to that country’s voltage. So make sure you’re sending the correct voltage to your amp before you connect it to AC power.
9
10