User`s guide

DVDO iScan Mini - 4K Scaler / Video Enhancement
DVDO iScan Mini 9
Connections
iScan Mini is normally connected as the last device before the display HDMI input. It is small enough to
be hidden behind an AVR or a wall mounted TV. It should be mounted in such a way as to make the IR
receiver capable of receiving commands from the remote control. If this is not possible, an IR extender
cable
(http://www.monoprice.com/Product?c_id=109&cp_id=10110&cs_id=1011009&p_id=8060&seq=1&fo
rmat=2 ) can be used.
When used as a test pattern generator, no input is required.
Controls: buttons and the remote
iScan Mini has three physical buttons:
 Enhancement button manually cycles through Enhancement presets (Low, High, User1, User2, Off)
o When mode is changed, an on-screen message will indicate the new mode
 Scaling button manually cycles through scaling presets (Auto, DVDO, off)
o When mode is changed, an on-screen message will indicate the new mode
 F/W update button (recessed) – While iScan Mini is connected directly to a PC with a USB cable,
press the F/W update button for 2 seconds to enter firmware update mode.