Manual

949-1270 Page 16 of 28 December, 1998
POH (Option 934, 936, Analog Retransmission Output) Process Out-
put High: Select from any value greater than POL to +9999°F,
+5530°C, or 9999 counts.
LOrE (Option 992, 993, Serial Communications) Local / Remote Status:
Select LOC or rE.
LOC The host computer is advised not to send remote
commands. Any write commands sent to the controls
will be rejected.
rE The host computer is allowed to send write commands.If
the control is not addressed within the time set in the nAt
(No Activity Timer, see Secure Menu) the CHEC LorE
error message will be displayed.
Addr (Option 992, Serial Communications) Control Address: Set from 1
to 3FF. This number (hexadecimal, base 16) must match the
address number used by the host computer. Viewed only in this
menu. To change this parameter, see Addr in the Secure Menu.