Owner's manual

Model UHH-BTG Wireless Mobile Gateway
Specifications - Installation and Operating Instructions
Bulletin TE-UHH-BTG
DWYER INSTRUMENTS, INC. Phone: [phone] www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: [phone] e-mail: [e-mail]
S
PECIFICATIONS
Wireless Protocol: Conforms to Bluetooth SIG, Inc. low energy wireless
technology.
Wireless Distances: 50´ (15 m) or greater.
Response Time: 1 s.
Temperature Limits:
Ambient: 5 to 125°F (-15 to 51°C);
Battery Charging: 32 to 113°F (0 to 45°C).
P
ower Requirements: 3.7 V YT562447 lithium ion battery, installed functional,
u
ser replaceable.
W
eight: 2.5 oz (70.87 g).
Agency Approvals: CE with CE approved charger, RoHS, FCC.
T
he Model UHH-BTG Wireless Mobile Wireless Gateway transforms the
wireless signal from any Dwyer Instruments, Inc. universal handheld probe or
module into a Bluetooth SIG, Inc, Wireless Technology. Using this gateway, any
iOS
®
Firmware version 5.X or later or Android
®
Firmware version 3.X or later
smartphone or tablet can become the base instrument for measuring or logging.
Once the gateway is paired with a phone or tablet, our Mobile Meter™ app or any
other Dwyer Instruments, Inc. approved apps can detect available probes or
modules. Wireless gateways can detect probes or modules that are 50 feet away
o
r even greater distances depending on the environment. The wireless signal from
t
he gateway to the mobile device adds at least another 25 feet of sensing distance.
M
odel UHH-BTG is compact in size and clips on to most standard belts. The
rechargeable battery can be charged using the same mini-USB cable and charger
as the probes or modules. LED lights indicate the battery status and whether the
gateway is communicating properly.
2-13/16
[71.50]
2
-7/16
[
61.98]
1
-3/16
[
29.86]
1-17/32
[39.15]
LED Status
Paired or pairable to
phone or tablet
Communications to
mobile device or probes
Charging or powering off
Low battery
iOS
®
is a registered trademark of Cisco Systems, Inc.
Android
®
is a registered trademark of Google, Inc.
Belt Clip
Bi-Color LED
Power Button
USB Charger
Connector
Figure 1
Blue LED
Slow blink
Rapid blink
Off
Off
Red LED
Off
Off
Solid
Slow Blink
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Cet appareil est conforme à des règlements d'Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit
accepter toute interférence reçue, y compris les interférences pouvant entraîner un
fonctionnement indésirable.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du
Canada.
NOTICE