User's Manual

8. Press the Shutter button to confirm.

9. To exit the menu, press the Mode

button repeatedly until the EXIT

screen appears.

10.

Press the Shutter button to exit SET mode.

Looping video mode

• The loop video function sets the video resolution

automatically to 1080p30.

• Multiple small segments are written to the memory card,

and these segments will be overwritten during loop

recording.

• Without any looping files, the system will indicate that

the card is full when the remaining storage is less than

800MB.

• The looping video will perform when the remaining

storage and saved looping files capacity are more than

800MB.

• When looping video mode is enabled, you can do the

following operations in SET menu:

Disable the looping video mode, enable/disable the

upside down function, delete the all looping files.

• When you perform the Delete All operation, only the

looping files will be deleted.

• When the loop recording is enabled the auto power off

time will depend on the Auto Power Off setting. For

example, the Auto Power Off is set to 10 minutes, the

camera will automatically power off after being idle for

10 minutes.