User's Manual

31
• If you power on the camera manually, you need to start
and stop the video recording manually too.
Looping video mode with USB adapter
• When the camera is connected to a USB adapter, the
video recording starts automatically. When the USB
adapter is disconnected, the recording will stop recording
after 30 seconds. Then it will automatically save the file
and turn the device off.
• When the camera is connected to a USB adapter, the
video recording starts automatically.
If you manually stop the recording:

the camera will automatically power off after being
idle for 10 minutes when Auto Power Off is set to
10 minutes.
OR
 the camera will automatically power off after 30
seconds when the USB adapter is disconnected or
without power supply.
4.6 Diving
This menu allows you to set the camera to diving mode for diving
case and for capturing images or recording a video while diving.
When you use the diving case, you have to switch the diving mode
to fit the optical view angle.
Do the following to enable this feature.
1.
Press the Mode button repeatedly to change to SET
mode.