Installation Sheet

- 2 -
2b
8
7302029-100 Rev. B
ROUGHING-IN DIMENSIONS:
NOTE: Distance from wall to closet flange
centerline must be as listed below:
Seagram
™
1.28 gpf / 4.8 Lpf One-Piece Toilet
Model# D22015F101
Wyatt
™
1.28 gpf / 4.8 Lpf One-Piece Toilet
Model# D22005C101
IMPORTANT: Water supply on
the wall is required at 3-3/4"
(95mm) or 9" (299mm) from
centerline of the toilet (see
rough-in).
First suggested position is
hidden behind the toilet. The
geometry of the toilet gives
space for this installation.
The second suggested position
is next to the toilet. Between
these two positions, the space
for the supply between wall and
toilet is limited to 3-1/4"
(95mm). In this case, check
your supply and hose
dimensions.
IMPORTANT: Water supply on
the wall is required at 3-3/4"
(95mm) or 9" (299mm) from
centerline of the toilet (see
rough-in).
First suggested position is
hidden behind the toilet. The
geometry of the toilet gives
space for this installation.
The second suggested position
is next to the toilet. Between
these two positions, the space
for the supply between wall and
toilet is limited to 3-1/4"
(95mm). In this case, check
your supply and hose
dimensions.
3-7/16"
(87 mm)
3-1/2"
(88 mm)
SUPPLY
AS
REQUIRED
(position 1 or
position 2)
BACK VIEW
29-11/16"
(754 mm)
18-1/2"
(470 mm)
8"
(203 mm)
FINISHED WALL
7/8"
(22 mm)
15-3/8"
(390 mm)
14-1/4"
(364 mm)
6"
(152 mm)
13-1/2"
(345 mm)
12"
(305 mm)
16-1/2"
(419 mm)
5-1/2"
(140 mm)
8-1/2"
(217 mm)
30-3/4"
(782 mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
FINISHED
FLOOR
9"
(229 mm)
3-3/4"
(95 mm)
14"
(356 mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140 mm) CENTERS
FINISHED WALL
FINISHED
FLOOR
7/8"
(23 mm)
1-1/8"
(29 mm)
3-1/2"
(88 mm)
2-3/4"
(70 mm)
9-11/16"
(246 mm)
12"
(305 mm)
11-5/8"
(296 mm)
16-1/2"
(419 mm)
30-3/4"
(782 mm)
13-3/4"
(349 mm)
6-1/2"
(163 mm)
28-1/4"
(717 mm)
14-1/2"
(366 mm)
18-1/2"
(470 mm)
5-1/2"
(140 mm)
SUPPLY AS
REQUIRED
(position 2)
SUPPLY AS
REQUIRED
(position 1)
6"
(152 mm)
3-3/4"
(95 mm)
14"
(356 mm)
BACK VIEW
9"
(229 mm)