Installation Sheet

- 2 -
INSTALL CLOSET BOLTS
Install closet bolts in ange channel
and slide into place parallel to wall.
TIP: Place 2 pieces of masking tape
on oor (as shown) to help with
alignment in step 4.
Apply weight evenly. Do not move
after placement. Water tight seal
may break.
7302362-100 Rev. A (5/18)
1
4
2
5
3
!
WARNING:
Overtightening of water supply
line nuts could result in breakage
and potential ooding. If the
connection leaks after hand
tightening, replace the supply
line. Do not use any type of
sealant on the water supply
connection.
Use of plumber’s putty,
pipe dope, or any other
type of sealant will void
the warranty.
For seat installation,
see instructions
included with seat.
*
!
CLOSET FLANGE
DRAIN
CENTER LINE
CLOSET BOLTS
CLOSET BOLT
WASHER
NUT
Press
firmly.
WAX RING