Installation Guide

Single inlet control box
Clean filter :
Single inlet control box
1. Disconnect the power plug.
2. Turn off waterway.
3. Take out filter screen with
a plier.
4. Clean filter screen gently with
running water and replace the
screen. Connect the power.
Control Box
Power plugs
Terminal port
outlet
in-flow
*** Hot/cold water mixing valve can be purchased.
hot
supply
cold
supply
BDM Variation
(Below Deck Mechnical)
Mixing Valve
Sensor control box
Sensor control box
*Hot & Cold hoses connect
directly to water supply.
Connection of Electric
Power plugs