Instructions / Assembly

www.dyconnfaucet.com
Vertical Mounting
1.Have one person hold the side of the mirror while another person holds the back
frame. Pull the bottom of the glass out from the back frame and lift up to separate
these two parts.
2. Remove the two horizontal mounts on the back of the frame. Line up the holes
on the bracket with the holes placed for the vertical mount and screw the bracket
in. Remove the two catch locks located at the bottom of the metal frame by
removing its screw.
3. Using an I-Beam level, mount the back frame onto the wall. (Use an anchor when
installing on drywall, concrete, or tile surfaces.)
connect the neutral (White), hot (black), and ground (copper wire or Green) wire
between the mirror and the junction box.
5. Mount the mirror vertically by placing the mirror’s side on to the mounting
brackets. Two L hooks on the glass should latch on to the mounts. There is no catch
lock needed for vertical mounting.
6. Test the mirror.
Vertical Mount
HandlesLock catch
(Only when
hung horizontally)
Horizontal Mount
E491008