Installation Guide

Step 2: Attach both water hoses to the faucet by screwing them into the two internal

ports located inside the base of the faucet. The red/blue indicator on the

side of the handle illustrates the hot water hose (red - 1) is attached to the left

port while the cold water hose (blue -2) is attached to the right port.

Step 3: Attach the shank (1) and base (2) and proceed to install the faucet through the

deck mounting hole. Be sure to align the faucet in the desired direction. Please

note the rubber base seal is pre-installed inside to the faucet base.

Diagram 4

Diagram 3

Installation Instructions

1 2