Instructions / Assembly

10
ASSEMBLY INSTRUCTIONS
1. Remove the 4 pre-assembled M4 x 35 mm screws
(BB) from the door handle (E) and attach the door
handle (E) on the upper door assembly (C) as
shown. Tighten the screws.
2. Remove the 2 pre-assembled M5 x 12 mm screws
(AA) from the smoker cabinet assembly (A). Insert
the 2 screws into the rear handle (B), and into the
threaded holes on the back of the smoker cabinet
assembly (A). Tighten the screws.
1
2
B
A
C
Hardware Used
BB
M4 x 35 mm
Screw
x 4
BB
Hardware Used
AA
M5 x 12 mm
Screw
x 2
AA
E