Instructions / Assembly
13
OPERATING INSTRUCTIONS
READ ALL INSTRUCTIONS PRIOR TO USING THE SMOKER FOR THE FIRST TIME
Before Initial Use:
Remove all packaging, hang tags, plastic straps, and sales stickers if present. Do not use sharp tools.
Wash cooking grates with warm, soapy water, rinse and allow to completely dry before placing them
back into the smoker.
Prior to initial use, it is important to “season” your smoker. Seasoning helps eliminate potential factory
residue that occurs during production and enhances avoring, durability and overall performance.
Refer to Page 17 for operating the time and cook temperature required for seasoning.
Before Each Use:
READ ALL INSTRUCTIONS PRIOR TO USING THE SMOKER
• The smoker must be on a level, stable, noncombustible surface in an area clear of combustible
material, including long or dry grass.
• Avoid moving the smoker over bumpy or uneven surfaces. Damage to the smoker may occur
as a result.
• To prevent household circuit breakers from tripping, keep electric smoker controls and cord
connections dry and do not use other electrical products on the same circuit.
• Make sure the grease tray, wood chip box and water bowl are clean and empty and placed back
into the smoker according to the instructions.
• Lightly coat each cooking grate with vegetable oil or vegetable oil spray, to prevent foods from
sticking to the grates during cooking.
• DO NOT cover the cooking grates with metal foil.
WARNING
Failure to follow all manufacturer’s instructions could result in serious personal
injury and/or property damage.
Use care when operating your smoker.
To avoid possible are-ups or grease res, clean and empty the water bowl and
grease pan before use.
Read and follow all the information and safeguards in this product guide before
attempting to assemble or operating this smoker.
CAUTION
• Do not use sharp or pointed tools to clean smoker.
• Do not use abrasive oven cleaners, steel wool or metal brushes to clean porcelain
grates or smoker body. They will damage the nish.
• Replace damaged part(s) only with Dyna-Glo certied replacement parts. Do not
attempt to repair damaged parts.