Use and Care Manual

10
ASSEMBLY INSTRUCTIONS
Remove the 4 pre-assembled M4 x 35 mm
screws (BB) from the door handle (E) and attach
the door handle (E) on the upper door assembly
(C) as shown. Tighten the screws.
Remove the 2 pre-assembled M5 x 12 mm screws
(AA) from the smoker cabinet assembly (A). Insert
the 2 screws into the rear handle (B), and into the
threaded holes on the back of the smoker cabinet
assembly (A). Tighten the screws.
2.
1.
Hardware Used
M4 x 35 mm
Screw
x 4
BB
Hardware Used
M5 x 12 mm
Screw
x 2
AA
1
C
BB
E
2
B
A
AA