Use and Care Manual

NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
5
TANK INSTALLATION INSTRUCTIONS
Tank Installation for DOT Certied 1 lb. Propane Cylinder(s) (Fig. 1)
• Open easy access tank compartment door(s).
• Locate regulator and swivel it upward by hand to provide better access for cylinder
• Attach cylinder(s) to swivel mount by gently turning clockwise until it is hand tight. Do not overtighten. Do not use tools to tighten.
• Check for gas leaks by using a 50% soap-water solution at the joint of the regulator and cylinder.
1 lb. DOT Approved
Cylinder Tank
Regulator
Access Door
Fig. 1 - 1 lb. Cylinder Tank Installation