Instructions / Assembly

Figure 21. Replacing Fuse

10. REPLACING FUSE

NOTICE : This heater is fuse protected.

If your heater fails to ignite, DO NOT RETURN YOUR HEATER TO THE

STORE.

Please follow the simple instructions below to inspect and change the fuse.

WARNING : SHOCK HAZARD

To prevent personal injury, unplug the power cord before replacing fuse.

1. Unplug heater.

2. Remove side cover screws using medium phillips screw driver.

3. Disconnect switch wires from power switch.

4. Remove fuse from fuse holder.(See Figure 21.)

5. Replace fuse.

WARNING : FIRE HAZARD

To avoid

Do not substitute with a higher or lower current rating.

6. Replace switch wires to power switch.

7. Replace side cover.

NOTE : fuse rating : AC 125/8A

PROCEDURE FOR REPLACING FUSE

Fuse Holder

KFA80DGD/135DGD/180DGD/220DGD Models

KFA50DGD

Fuse

Switch Wire

Power Switch

Side Cover

Screw

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!