Instructions / Assembly

SAFETY CHECKLIST

Before every ride, it is important to carry out the following safety checks: (For information and instructions on performing

speciﬁc equipment checks, locate the relevant section in the manual referenced on pages 5–6.)

1. BRAKES

• Ensure front and rear brakes work properly.

• Ensure brake pads are not over worn and are correctly positioned in relation to the rims.

• Ensure brake control cables are properly lubricated, correctly adjusted, and display no obvious wear.

• Ensure brake control levers are properly lubricated and tightly secured to the handlebar.

2. DERAILLEURS

• Check that the front and rear derailleurs are adjusted and functioning properly.

• Ensure that the shifter levers are securely attached.

• Ensure that derailleurs, shift levers, and control cables are properly lubricated.

• Shift through all the gears while pedaling to ensure that the derailleurs are adjusted and functioning

properly.

3. CRANKS AND PEDALS

• Ensure pedals are securely tightened to the cranks.

• Ensure cranks are securely tightened to the bottom bracket and are not bent.

4. FRAME AND FORK

• Check that the frame and fork are not bent, broken, or cracked.

• If either are found to be bent, broken, or cracked, they should be replaced.