Instructions / Assembly

22
C
The handlebars should come attached to the stem.
Simply ensure that the brake and derailleur cables track
smoothly, and that the handlebar bolt(s) are properly
tightened with (C) a 4, 5, or 6 mm Allen Wrench. (See
Figures 23-25). In the case of a 2 or 4-bolt stem, tighten
the bolts alternating between bolts every few turns. We
will adjust the position and rotation of the handlebars,
brake levers, and shifters later on (see page 35).
Figure 23
Figure 24 Figure 25