User manual

ADSL Router User Manual
xi
Configuration and Management
 User-friendly embedded web configuration interface with password protection
 Remote management accesses control
 Telnet session for local or remote management
 HTTP firmware upgrades via web browser GUI directly
 Distribute IP addresses to end users via DHCP server provided by ADSL router
 SNMPv1/v2 agent with MIB-II, ADSL Line MIB
Unpacking
Check the contents of the package against the pack contents checklist below. If any of the items is
missing, then contact the dealer from whom the equipment was purchased.
 ADSL Router
 Power Adapter and Cord
 RJ-11 ADSL Line Cable
 RJ-45 Ethernet Cable
 Quick Start Guide
 Driver & Utility Software CD
 USB Cable (for model with USB interface only)
Subscription for ADSL Service
To use the ADSL Router, you have to subscribe for ADSL service from your broadband service
provider. According to the service type you subscribe, you will get various IP addresses:
Dynamic IP: If you apply for dial-up connection, you will be given an Internet account with
username and password. You will get a dynamic IP by dialing up to your ISP.
Static IP address: If you apply for full-time connectivity, you may get either one static IP address
or a range of IP addresses from your ISP. The number of IP addresses varies according to different
ADSL service provider.