User manual

ADSL Router User Manaul
28
MAC Encapsulated Routing (MER)
If the type you choose is MAC Encapsulated Routing (MER), please refer to the following
information.
MER mode is used in business environment
where static IP address and subnet are
assigned by your ISP.
Choose MER and click Next.
Obtain an IP address automatically: Click
this button to make the system get an IP
address automatically.
Use the following IP address:
If you want to set WAN IP address by
yourself, you have to click on this button to
invoke the following entries.
WAN IP Address:
Type in the IP address that you got from ISP
for the WAN interface.
WAN Subnet Mask:
Type in the subnet mask address that you got
from ISP for the WAN interface.
Default Gateway:
Type in the default gateway that you got
from ISP for the WAN interface.
Obtain DNS server address automatically:
Click this button to make the system get
DNS server automatically.
Use the following DNS server address:
If you want to set DNS server by yourself,
you have to click on this button to invoke the
following entries.
Preferred DNS server:
Type in your preferred DNS server that you
got from ISP.
Alternate DNS server:
Type in the alternate DNS server that you got
from ISP.
Enable NAT:
Check Enable NAT to enable this function.
Please type in the WAN IP address, Subnet Mask,
Default Gateway and DNS server addresses. Then
Click Next to get the following page.
Primary IP Address:
Type in the first IP address that you got from
your ISP for your LAN connection.
Subnet Mask:
Type in the subnet mask that you got from
your ISP for your LAN connection.