User manual

ADSL Router User Manaul
54
you set 128-bit in this field, then the
receiving station must be set to use 128 Bit
Encryption, and have the same Key value
too. Otherwise, it will not be able to decrypt
the data.
Format:
Choose the typing method of encryption key.
You have to click either Hexadecimal digits
or ASCII characters and type the keys on
the fields of Key 1 to Key 4.
Key 1 to 4:
Type the encryption key length and fill out
WEP keys. The system allows you to type in
4 kinds of the WEP key. For 64-bit WEP
mode, the number you can type is that 5
characters or 10 hexadecimal digits. As for
128-bit WEP mode, the number you can
type is that 13 characters or 26 hexadecimal
digits.
Default Transmission Key:
Select one of network key that you set on the
Key boxes as the default one.
After finished settings, click Apply for
activation.
For Open System (or Shared Key), 128-bit