User manual

Chapter 4: Web Configuration

Management

Admin Account

This page allows you to type in the password for accessing into your DSL Router.

For the Admin Account, the default setting

for user password is admin. If you want to

change the username and the password,

please retype the new password in the

Confirm field for confirmation. Then click

Apply.

Remote Access

There are four interfaces for the remote access. Please choose one of them if you want to enable the

remote access control.

Select the Internet Connect:

Select one connection item from the drop

down list to enable the function.

Web Browser:

Choose this box if you want to have remote

control through HTTP. The default port

number will be shown in the box. Modify

this number whenever you want.

Telnet:

Choose this box if you want to have remote

control through telnet.

SNMP:

Choose this box if you want to have remote

control through SNMP agent.

Ping:

Choose this box if you want to have remote

control through ping command under DOS

prompt.