Setup guide

ADSL 2+ Modem Router Quick Set-up Guide
To set IP extension, go to the Advanced menu. Select WAN > Internet. Click on
the “modify icon” under Edit:
The next screen displays VPI/VCI as 8/35 (Australia) or 0/100 (New Zealand).
Do not change these numbers. Go Next. Select PPPoE LLC (Australia) or PPPoA
VCMUX (New Zealand). Go Next. On the next screen untick Enable NAT, and
tick PPP IP extension as illustrated. Go Next.
Enter your Internet account user name and password. Go Next. The new
configuration is displayed. Click Apply to confirm changes. The router will
restart itself to activate IP extension mode.
NAT or firewall settings disappear from the Advanced menu hereafter. Now
follow Step 2 of Section 5 – Going On-line.
Please refer to the User Manual for other advanced functions. Always restart
the router to activate any changes to configuration.