Use and Care Manual

- 12 -

4. Locate the oval shaped opening on both sides of the fireplaces, underneath the top trim. From

the inside of the panel, secure the screw through the oval to the wall studs.

5. Place fireplace media onto flame bed and place glass back on.

6. Put trim piece onto fireplace and check for fit.

2.4 INSTALLATION PROCEDURE – BUILT-IN

NOTE: There are four rubber feet on the bottom of the fireplace that can be

removed before installation

1. The built-in installation method will allow for a deeper recessed installation made to

accommodate thicker finishing material and offer more design variations.

Build frame according

to framing dimensions

on previous page and

ensure a power source is available.