Use and Care Manual

© 2023 Dynasty Fireplaces | V 1.0.0
- 16 -
2.6 POWER OPTIONS
2.6.1 Plug-in
You may run the power cord out of the framed wall opening to an existing outlet or
install an outlet on a nearby wall stud within the wall). If the cord is not long enough to
reach the outlet, a grounded extension cord minimum AWG No. 14 wiring and rated to
a minimum or 1875 watts may be used.
2.6.2 Hard-wire
A qualified electrician may remove the cord connection and wire the appliance directly
to the house hold wiring. The appliance must be electrically connected and grounded
in accordance with local codes. The knock-out box is located on the back right side of
the fireplace.