DX-WGPNBC_WGPDTC_Combo.fm Page 1 Thursday, June 22, 2006 12:31 AM Wireless LAN 802.11g Enhanced Notebook and Desktop Cards Adaptateurs pour réseau local sans fil 802.11g amélioré pour ordinateurs portatifs et de bureau Tarjetas para Red Inalámbrica 802.
DX-WGPNBC_WGPDTC_Combo.fm Page 2 Thursday, June 22, 2006 12:31 AM 2 Contents Dynex DX-WGPNBC or DX-WGPDTC Wireless LAN Card Contents Introduction ..................................................................................... 2 Installing the software and hardware .............................................. 2 Configuring the wireless network .................................................... 3 Troubleshooting ...............................................................................
DX-WGPNBC_WGPDTC_Combo.fm Page 3 Thursday, June 22, 2006 12:31 AM 3 Configuring the wireless network 8 If you are using Windows 98, right-click on the Network Neighborhood desktop icon, then click Properties. The Local Area Connection Properties dialog box opens. -ORIf you are using Windows ME and Windows 2000, right-click on the Network Neighborhood desktop icon, click Properties, then click Local Area Connection's properties. The Local Area Connection Properties dialog box opens.
DX-WGPNBC_WGPDTC_Combo.fm Page 4 Thursday, June 22, 2006 12:31 AM 4 Configuring the wireless network Note: The wireless utility icon should appear in your icon tray. If the icon is red, it means that the Wireless LAN 802.11g Enhanced NIC configuration is invalid or incomplete. • Infrastructure Mode—The driver scans all available channels continuously until it finds one or more access points that match its SSID (network name). At that point it tries to authenticate and associate with the access point.
DX-WGPNBC_WGPDTC_Combo.fm Page 5 Thursday, June 22, 2006 12:31 AM 5 Configuring the wireless network Connecting to a network 5 Click Next. The following screen opens. To connect to a network: 1 Click Connect on the Available Networks tab. The following screen opens. 2 Set the values of the following fields: • Network Name—Type a name for the new profile. • Network Type —Select from the list of supported network types. Supported types include: • Peer to Peer—This is the 802.
DX-WGPNBC_WGPDTC_Combo.fm Page 6 Thursday, June 22, 2006 12:31 AM 6 Troubleshooting 9 Click Next. The following screen opens. About tab The About tab shows the product version including details of the driver, application, and firmware versions. You must use this version number when reporting problems to Dynex. 10 • • • • • 11 The purpose of this screen is to configure the TCP/IP setting of each wireless connection.
DX-WGPNBC_WGPDTC_Combo.fm Page 7 Thursday, June 22, 2006 12:31 AM 7 FCC FCC Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DX-WGPNBC_WGPDTC_Combo.fm Page 8 Thursday, June 22, 2006 12:31 AM 8 Table des matières Adaptateur pour réseau sans fil DX-WGPNBC ou DX-WGPDTC de Dynex Table des matières Introduction ..................................................................................... 8 Installation des logiciels et du matériel............................................ 8 Configuration du réseau sans fil ..................................................... 10 Problèmes et solutions......................................
DX-WGPNBC_WGPDTC_Combo.fm Page 9 Thursday, June 22, 2006 12:31 AM Installation des logiciels et du matériel 7 Cliquer à l’aide du bouton droit de la souris sur l’icône du bureau My Computer (Poste de travail), cliquer sur Properties (Propriétés), puis cliquer sur Hardware Device Manager (Gestionnaire de périphériques matériels). Vérifier que l'adaptateur est listé parmi les périphériques de l’ordinateur.
DX-WGPNBC_WGPDTC_Combo.fm Page 10 Thursday, June 22, 2006 12:31 AM 10 Configuration du réseau sans fil 14 Cliquer sur TCP/IP pour configurer l’adresse IP de l’ordinateur. Sélectionner soit Obtain an IP address automatically (Obtenir une adresse IP automatiquement) ou le paramètre Use the following IP address (Utiliser l’adresse IP suivante).
DX-WGPNBC_WGPDTC_Combo.fm Page 11 Thursday, June 22, 2006 12:31 AM 11 Configuration du réseau sans fil Remarque : Ce champ affiche également les messages d’erreur si le pilote échoue dans sa tentative d’initialisation. Network Type (Type de réseau) — Les types de réseaux possible sont : • Infrastructure Mode (Mode d’infrastructure) — Le pilote balaie tous les canaux disponibles en continu jusqu’à détecter un ou plusieurs points d’accès correspondant à son SSID (nom réseau).
DX-WGPNBC_WGPDTC_Combo.fm Page 12 Thursday, June 22, 2006 12:31 AM 12 Configuration du réseau sans fil 3 Cliquer sur Next (Suivant). L’écran suivant s’affiche. 7 Cliquer sur Next (Suivant). L’écran suivant s’affiche. 4 Régler les valeurs des champs suivants : • Authentication Mode (Mode d’authentification) — Pour utiliser le mode d’authentification par défaut. • Encryption (Cryptage) — Pour utiliser le cryptage par défaut. 5 Cliquer sur Next (Suivant). L’écran suivant s’affiche.
DX-WGPNBC_WGPDTC_Combo.fm Page 13 Thursday, June 22, 2006 12:31 AM 13 Problèmes et solutions Onglet de paramétrage du profil (Profile) Cliquer à l’aide du bouton droit de la souris sur l’icône du bureau My Computer (Poste de travail), puis sélectionner Properties (Propriétés). Cliquer sur Device Manager (Gestionnaire de périphériques) puis cliquer sur Network Adapter (Adaptateur réseau). Si l'adaptateur WLAN 802.11g amélioré est listé, cela signifie qu’il est installé correctement.
DX-WGPNBC_WGPDTC_Combo.fm Page 14 Thursday, June 22, 2006 12:31 AM 14 Avis juridiques Cet appareil est conforme à l’article 15 du règlement de la FCC. Son utilisation est soumise aux deux conditions suivantes : (1) Ce dispositif ne doit pas causer d’interférence nuisible et (2) ce dispositif doit accepter toutes interférences reçues, y compris celles risquant d'entraîner un fonctionnement indésirable dudit dispositif.
DX-WGPNBC_WGPDTC_Combo.fm Page 15 Thursday, June 22, 2006 12:31 AM 15 Contenido Tarjeta para Red Inalámbrica Dynex DX-WGPNBC o DX-WGPDTC Contenido Introducción....................................................................................15 Instalación del software y el hardware............................................15 Configuración de la red inalámbrica................................................17 Localización y Corrección de Fallas ..................................................
DX-WGPNBC_WGPDTC_Combo.fm Page 16 Thursday, June 22, 2006 12:31 AM 16 Instalación del software y el hardware 7 Haga clic con el botón secundario en el icono de Mi PC en el escritorio, haga clic en Properties (Propiedades) y luego haga clic en Hardware Device Manager (Administrador de Dispositivos de Hardware). Verifique que la tarjeta esté listada cómo uno de los dispositivos en su computadora.
DX-WGPNBC_WGPDTC_Combo.fm Page 17 Thursday, June 22, 2006 12:31 AM Configuración de la red inalámbrica 14 Haga clic en TCP/IP para establecer las direcciones para su computadora. Seleccione ya sea Obtain an IP address automatically (Obtener una dirección IP automáticamente) o Use the following IP address (Usar la siguiente dirección IP).
DX-WGPNBC_WGPDTC_Combo.fm Page 18 Thursday, June 22, 2006 12:31 AM 18 Configuración de la red inalámbrica • Scanning (Escaneando)—Indica que la computadora está buscando un punto de acceso disponible dentro del rango. Nota: Este campo también muestra mensajes de error si el controlador no se puede inicializar.
DX-WGPNBC_WGPDTC_Combo.fm Page 19 Thursday, June 22, 2006 12:31 AM 19 Configuración de la red inalámbrica 3 Haga clic en Next (Siguiente). Se abrirá la siguiente pantalla. 7 Haga clic en Next (Siguiente). Se abrirá la siguiente pantalla. 4 Ajuste los valores de los siguientes campos: • Authentication Mode (Modo de Autenticación)—Use el modo de autenticación automático. • Encryption (Codificación)—Use la codificación por omisión. 5 Haga clic en Next (Siguiente). Se abrirá la siguiente pantalla.
DX-WGPNBC_WGPDTC_Combo.fm Page 20 Thursday, June 22, 2006 12:31 AM 20 Localización y Corrección de Fallas Ficha de Ajustes de Perfil Haga clic con el botón secundario en el icono Mi PC en el escritorio y luego seleccione Properties (Propiedades). Haga clic en Device Manager (Administrador de Dispositivos) y luego haga clic en Network Adapter (Adaptador de Red). Si encuentra la tarjeta WLAN 802.11g Mejorado listada significa que la tarjeta está instalada adecuadamente.
DX-WGPNBC_WGPDTC_Combo.fm Page 21 Thursday, June 22, 2006 12:31 AM 21 Avisos legales Este dispositivo satisface la parte 15 del reglamento FCC. Su operación está sujeta a las dos condiciones siguientes: (1) Este dispositivo no puede causar interferencia dañina, y (2) este dispositivo debe aceptar cualquier interferencia recibida incluyendo interferencias que puedan causar una operación no deseada.
DX-WGPNBC_WGPDTC_Combo.
DX-WGPNBC_WGPDTC_Combo.
DX-WGPNBC_WGPDTC_Combo.fm Page 24 Thursday, June 22, 2006 12:31 AM www.dynexproducts.com (800) 305-2204 Distributed by Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. Distribué par Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 É.-U. Distribuido por Best Buy Purchasing, LLC 7601 Penn Ave. South, Richfield, MN 55423 U.S.A.