User's Manual

10
Setting up the product for Macintosh
In Mac OS X 10.2.8, the message may read as shown. For instructions to
initialize the floppy disk, see page 13.
Mac OS X 9.x
To install the USB FDD drivers:
1 Start the computer, then connect the USB cable to the USB port on the
computer.
2 Because computers with Mac OS X or later include a “USB Mass Storage
Support” driver provided by Apple Computer, Inc., no additional USB FDD
drivers are necessary.
3 Insert a formatted floppy disk into the USB FDD. A floppy icon will appear
on the desktop.
4 If the floppy disk is not yet formatted for use in Mac OS 9.x, a message will
appear indicating the disk will need to be initialized prior to operation.
Messages may vary slightly between different Mac OS systems.
For instructions to initialize the floppy disk, see page 15.