Specifications

INTRODUCTION

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

6. Key / Light Switch

To reduce the possibility of component damage, the vehicle must be stopped

before moving the key switch or the direction selector.

Located on the dash panel, this switch controls the basic electrical system of the vehicle

as well as the front and rear lights. The switch has three positions, OFF, ON, and

LIGHTS. To prevent inadvertent operation of the vehicle when left unattended, the key

should be turned to the ‘OFF’ position and removed.

If the vehicle is equipped with factory installed custom accessories, some accessories remain operational with the

key switch in the ‘OFF’ position.

7. State of Charge Meter

The state of charge meter is located on the dash panel beside the key switch. It indicates the amount of usable power

in the batteries, with ‘F’ indicating a full charge on the battery pack and ‘E’ indicating the battery pack needs to be

charged.

8. Direction Selector

To prevent loss of control, do not move vehicle direction selec-

tor while the vehicle is in motion. Moving the selector will

result in sudden slowing of the vehicle and the beeping of a

warning device.

Located on the seat wrap panel, the direction selector switch permits the

selection of either ‘F’ (forward), ‘R’ (reverse) or ‘N’ (neutral). When left unat-

tended, the vehicle should be placed in neutral, the parking brake engaged,

and the key removed.

When moved to into the “R” position, a reverse warnming buzzer will sound.

9. Fuse Block

The fuse block is used to provide electrical protection to some of the electri-

cal components and vehicle accessories. The fuse block is located under the

seat on the driver side fender liner.

NOTICE