Specifications

OPERATING PROCEDURES

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

OPERATING PROCEDURES

SERIAL NUMBER LOCATION

Two serial number and manufacture date code plates are on the vehicle. One (PART C) is placed on the body below

the front, driver side of the seat, PART D is placed on the frame weld tube. The other (PART A and PART B) is located

on the crossmember section of the chassis on the driver side (seat back support). To access it, raise the seat and lift up

the flap on the access panel.

Design changes take place on an ongoing basis. In order to obtain correct components for the vehicle, the manufacture

date code, serial number and vehicle model manufacture date code, and vehicle model must be provided when order-

ing service parts.

PART B

PART C/D

PART A

Part C

Lift Flap on Access Panel

Serial Number

Labels

Part A

Part B

Part D