User manual
13
© 2009, Elektro-Automatik GmbH & Co. KG
EN
About
User instruction manual
Battery charger Series BC 800 R
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +(49) 02162 / 37850
Fax: +(49) 02162 / 16230
Web: www.elektroautomatik.de
Mail: ea1974@elektroautomatik.de
© 2009 Elektro-Automatik
Reprint, duplication or partly, wrong use of this user
instruction manual are prohibited and might be followed
by legal consequences.
Date: March, 2009
Safety instructions
The battery chargers must only charge batteries or
battery chains (parallel or series connected) that
match the device specications. The maximum
charging is identical to the nominal current, if the
limitation is not activated!
Do not connect batteries that are not rechargeab-
le!
Switch device off before connecting batteries!
The cross section of the battery cable has to match
the nominal current of the device.
Avoid any damage to the device, do not insert metal
parts through the slots, do not obstruct the slots!
Mains connection must only be done by trained
technical personnel.
Mains connection only with appropriate leads and
under adherence of common safety measures.
Avoid direct sunlight and humidity.
Warning
When charging batteries, highly ammable gas can
emerge from the batteries. Always take care for
sufcient ventilation and strictly avoid open re and
spark formation in the proximity of the batteries.
•
•
•
•
•
•
•
•
•