How to Guide

Stop 1/2 way through and reverse
to clear chips.
Always remember to clear chips
by reversing the rotation of the
power drill when drilling depths of
more than 2 inches or when drilling
through hard woods. Listen closely
to your power drill and at any sign of
binding stop and reverse it to clear
the chips.
Continue drilling through after clear-
ing chips.
Reversing the rotation of the drill will
make it easy to remove from the
wall.
CONGRATULATIONS!
You have your hole through to the
attic.
RUN THE WIRE
Thread a good quality string line
through a bull nose tipped sh rod
(a.) or a lighted bull nose tip con-
nected to a sh rod (b.)
5
64
HOW TO RUN WIRES THROUGH EXISTING WALLS USING CABLE BIT TOOLS
EAGLE TOOL US www.eagle-tool.us P - 815-459-4177 F - 815-459-4178
MADE IN USA
Run the Fish Rod and string line up
through the hole in the re block and
then through the hole to the attic.
In this example we are using 2 Fish
Rods connected to accomodate the
distance to the attic and a lighted
bull nose tip.
7
Using the light to guide you in the
attic, snag the line with a Hook Tip
mounted on another Fish Rod. Pull
the line towards you.
Securely attach your wire or cable
to the string at either the opening
or in the attic. With a helper feeding
the wire or cable at one end pull the
string from the other end.
8
a. b.
In this example we used:
EA56256 (9/16 in X 54 in Auger Style Cable Bit)
EX18736 (3/16 in X 36 in Extension)
ETF25016 (1/4 in X 16 ft Fiberglass Fish Rod Kit)
ETFSLKIT1 ( Lighted Bull Nose Tip)
String Line