Product Manual
10
5) Stop/Start (pressure switch) control
Turn pressure switch "Off/Auto" switch to "Auto". Electric motor
should now start and fill air receiver(s) with compressed air until cut-
out pressure is reached. Compressor should stop and remain stopped
until air receiver pressure reaches the cut-in pressure. The unit will
continue to cycle in this automatic operation until the pressure switch
is turned to the "Off" position.
COMPRESSOR MAINTENANCE SCHEDULE
DAILY OR BEFORE EACH USE
•
Check oil level
•
%SBJODPOEFOTBUJPOGSPNBJSSFDFJWFSBGUFSFBDIVTF
•
Check for any unusual noise or vibration
•
Be sure all nuts and bolts are tight
WEEKLY
•
Turn off power. Clean dust and foreign matter from cylinder head, motor,
fan blades, intercooler and air receiver.
•
$MFDLBJSGJMUFSBOESFQMBDFJGOFDDFTTBSZ
•
Worn filters should be replaced.
•
Check V-belts for wear.
MONTHLY
•
Inspect unit for leaks.
•
Tighten joints if leaks are observed.
•
Check V-belts for proper tension.
•
Check compressor pulley and motor sheave are aligned and securely
fastened (see item 9).
QUARTERLY OR 300 HOURS (Whichever comes first)
•
Inspect the air receiver for corrosion or other damage
•
Change compressor oil.
•
Replace air filter (more often if compressor is used near paint
spraying operations or in dusty environments).
H
WARNING
exTrA CAre ShOuld be TAkeN TO AvOId
PerSONAl INjur eS WITh Au llY
CONTrOlled COMPreSSOrS
TOMATICA
I