Owners Manual

Installation Instruction 04

Shower head

Waterfall OFF ON

Jet

OFF ON

Shower head

OFF

Jet

Two sets of the faucet:

A.The faucet is the function conversion.Turn 90° left is the

pipe cleaning function while 90° right is the shower head.

B.The cold-hot water inlet valve is both for hot and cold

water.The one with red label or with H mark is for hot

water,while the one with blue label or with C mark is for

cold water.You could adjust the label on the faucet to get

your wanted temperature.

Three sets of the faucet:

A.Function conversion value.Turn 90° left is the pipe

cleaning function while 90° right is the shower head.

B.The water-in pipe where with blue label is cold water,

and the hand-hole faucet with label C is also cold

water.Turning left could alternate the volume of the

cold water.The maximum is 90° to the left.

C.The water-in pipe where with red label is hot water,

and the hand-hold faucet with label H is also hot water.

Turning left could alternate volume of the hot water.

The maximum is 90° to the left.

The product designs for water going in from nozzle,also could be used to adjust shower head water in or water in from

water outlet faucet.Water in from shower head is usually for body,head cleaning or etc.places.