User Manual

40
care
care
Cleaning the Exterior
1 You should inspect and clean your Tweak Enhance
every day. To clean, gently wipe the surface with a
soft, dry cloth or a moist non-alcohol disinfecting
wipe. Do not allow water or liquid to enter any
openings.
The daily use of a DryBoost UV® appliance
is recommended to reduce moisture
and wax buildup. www.tweakhearing.com
most ampli er repairs are
caused by moisture and earwax
clean
ampli er
daily
1
Do not rinse or submerge these parts in water. There is risk of damage if a water drop becomes
trapped in the tube. If this should occur, it will prevent sound from coming through the tube and
may be harmful to Tweak Enhance’s electronics.
41
Cleaning the Tip and Tube
1 Remove the sound tube from the case by unscrewing
the tube connector from the sound post (turning
counterclockwise).
1
2
3
2 Wipe the exterior of the tube
and tip.
3 Thread the cleaning tool wire
through the tube connector and
out of the tip. Wipe end of wire
and repeat as necessary to remove
moisture and debris from the tube.