USER MANUAL Everest Lift Table Everest Everest Spa Everest Eclipse *tables shown with optional accessories and/or finishes © Earthlite 2020, All Rights Reserved 1-400-0011 • Rev F • 9/21/20
Legal Notice The information provided in this document is intended for informational purposes only and is subject to change without notice. The information provided in this document should not be construed as a commitment by Earthlite®. © Copyright 2020 Earthlite® All rights reserved. This document or any portion thereof may not be reproduced in any way, including photocopying or translation to another language without the prior written permission from Earthlite.
Introduction Congratulations on your purchase of the multi-functional Everest lift table. The Everest has been designed for maximum comfort and to meet the specific positioning needs of your clients. The elegant single column design of the Everest and Everest Spa allows for plenty of clearance underneath the table for leg and knee room, while still providing exceptional strength. The Everest Eclipse adds a beautiful hardwood cabinet, providing a more custom and upscale look.
SECTION 1: SAFETY INFORMATION Safety Symbols Indicates an imminently hazardous situation which could result in serious or fatal injury. Familiarize yourself with the following Safety & Warning symbols. They are designed to prevent damage and injury to you, your clients, and your new Earthlite product. Indicates a potentially hazardous situation which could result in serious injury.
SECTION 1: SAFETY INFORMATION To reduce the risk of burns, fire, electric shock, or injury to persons: 1) Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. 2) Do not operate this equipment unless properly trained. 3) Install this furnishing in treatment area not accessible to the public. 4) Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
SECTION 2 : PRODUCT OVERVIEW Everest Everest Spa Everest Eclipse Available Tops Flat, Manual Tilt, Pneumatic Tilt, Pneumatic Salon, Electric Tilt, Electric Salon Flat, Manual Tilt, Pneumatic Tilt, Pneumatic Salon, Electric Tilt, Electric Salon Flat, Manual Tilt, Electric Tilt, Electric Salon Top Length 73” 73” 73” Top Width 28”, 30”, or 32” 28”, 30”, or 32” 28”, 30”, or 32” Top Cushioning 3” Deluxe Pro-Plush™ 3” Deluxe Pro-Plush™ 3” Deluxe Pro-Plush™ Top Corner Style Round Square Squar
SECTION 3 : INSTALLATION Your Everest table comes completely assembled and ready to use. Once the table is unpacked, follow the “Moving Your Table” instructions below. Moving Your Table CAUTION Your Everest table is very heavy - extreme caution should be used to avoid injury to yourself, others around you, and your table. DO NOT lift or move without using proper safety procedures/equipment. DO NOT turn the table on its side for any reason.
SECTION 4 : OPERATING INSTRUCTIONS Important Safety Notes Always use extreme caution when making any position adjustments to your table. Ensure all body parts and objects are clear from all moving parts. The described adjustments can be done with a client on the table, but use caution to ensure that the client’s weight is supported while positioning the table section(s). Do not sit or put unnecessary amounts of pressure on the back section of the table when it is in tilt position of any level.
SECTION 4 : OPERATING INSTRUCTIONS Electrical Specifications Spec North America Europe/Asia Input Voltage 120 VAC 220 VAC Input Frequency 60 Hz 50 Hz Consumption 2.5 Amps, 287.5 Watts 1.3 Amps, 287.5 Watts Output 32 VDC 32 VDC Duty Cycle 10%, 2 min/18 min 10%, 2 min/18 min China PLUG DESCRIPTION NORTH AMERICA UK / MIDDLE EAST 120V AC 220V AC ASIA EUROPE 220V AC 220V AC Key Lockout (ETL Option Only) If ordered, your table is equipped with a safety lockout.
SECTION 4 : OPERATING INSTRUCTIONS Foot Control Operation Your Everest foot control is already connected and ready for use. The foot control allows you to simply raise and lower the table, allowing convenient hands-free adjustments. Standard Foot Pedal ETL option Raise Entire Table Lower Entire Table Raise Entire Table Lower Entire Table Hand Control Operation (Electric Tilt/Salon Only) Your Everest hand control is already connected and ready for use.
SECTION 4: OPERATING INSTRUCTIONS Pneumatic Back Tilt (Optional on Selected Models) Step 1 Locate the pneumatic back tilt handle, which is located on the right side under the back tilt. Step 2 The handle is set to the locking position. Step 3 Squeeze / press the handle to release the pneumatic assist, which allows you to move the back tilt up or down. Step 4 With the handle squeezed / pressed, move the back tilt to the desired level and release the handle. It will lock in place.
SECTION 4 : OPERATING INSTRUCTIONS Manual Back Tilt (Optional on Selected Models) Step 1 To tilt the back section upward from its flat position, carefully place both hands underneath the rear edge of the upholstered top of the tilt section, as pictured. Step 2 Lift the tilt section of the table to the desired level. The tilt section will automatically ‘click’ into position as you lift upward.
SECTION 4 : OPERATING INSTRUCTIONS LED Chroma Lighting Hand Control Operation (Eclipse Only) With the remote, you can change the color to any one of 16 colors, or use the preset color changing patterns.
SECTION 5: CARE & MAINTENANCE Cleaning & Ongoing Maintenance RISK OF ELECTRIC SHOCK Always unplug this furnishing from the electrical outlet before cleaning. DO NOT USE acetone, “Armor All” type cleaners, citrus-based cleaners, or industrial cleaners. These can seriously damage the upholstery. Such damage would not be covered under warranty. With proper maintenance, your table is designed to give you years of trouble-free operation.
SECTION 5: CARE & MAINTENANCE Troubleshooting This helpful troubleshooting guide will provide you with information about how to recognize a problem with your table, determine possible causes, and find a solution. In the event your specific situation is not covered in this guide, please contact Earthlite so our technical support department can assist you. Beyond the troubleshooting guide below, do not attempt to repair the table yourself. This can void your warranty. Unauthorized service will not be covered.
Contact Us Hours of operation: Earthlite 990 Joshua Way Vista, CA. 92081 (800) 872-0560 (760) 599-1112 Int’l (866) 599-7374 fax info@earthlite.com Monday - Friday 8:00 a.m. to 5 p.m. PST Saturday - Sunday Closed Visit us online at: earthlite.