Warranty Guide

6
 Place the second plank tight to the short end of
the first one.
 Fold down with a single action movement.
 At the end of the first row put a spacer to the
wall and measure the length of the last plank to
fit.
 Cut hardwood floor plank with circular saw face
turned down OR with a hand saw with the
hardwood face turned up.
 Proceed with installing second row. Place the
floor plank tight to the short end of the previous
plank and fold it down in a single action
movement.
 After 2 to 3 rows, adjust the distance to the back
wall by placing more spacer.
 The minimum distance between end joints of
planks in parallel rows should not be less than 6”
(150 mm).