Installation & Assembly

ManualsBrandsEast West Furniture Manuals5 Piece Kitchen & Dining Room SetsButterfly Leaf Solid Wood Dining Set

AVON TABLE TOP WITH 42’’x60’’ 18’’ BUTTERFLY LEAF

- 1 -

ASSEMBLY INSTRUCTIONS

SKU: AVT

Description : AVON TABLE TOP WITH 42''x60'' 18'' BUTTERFLY LEAF

Product Dimension : W.42”xD.(42”/60”)xH.30”

Cube Size : 44.4”x44.4” x8” NW: 74.8 LBS

(Top) GW: 83.6 LBS

Cube Size : 24.4”x10.5”x9” NW: 17.6 LBS

(Pedestal) GW: 19.8 LBS

175 Southbelt Industrial Dr,

Houston, TX 77047

Email:sales@eastwestfurniture.net

Summary of content (5 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS SKU: AVT 175 Southbelt Industrial Dr, Houston, TX 77047 Email:sales@eastwestfurniture.net Description Product Dimension Cube Size (Top) Cube Size (Pedestal) : AVON TABLE TOP WITH 42''x60'' 18'' BUTTERFLY LEAF : W.42”xD.(42”/60”)xH.30” : 44.4”x44.4” x8” NW: 74.8 LBS GW: 83.6 LBS : 24.4”x10.5”x9” AVON TABLE TOP WITH 42’’x60’’ 18’’ BUTTERFLY LEAF -1- NW: 17.6 LBS GW: 19.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
PAGE 3
STEP 1 Attach Legs (C) to column (B) by using Nuts (3), and Washers (2) and (1). Tighten with Wrench (4) as shown below. STEP 2 Use the Allen key (5) to loosen the bolts and take off the plate underneath of the table top.
PAGE 4
STEP 3 Place the plate on top of the column (B), attach with washers (1), (2) and nuts (3). Tighten with the Wrench (4) as shown below.
PAGE 5
STEP 5 Unlatch 2 end pieces of table top by the latches underneath table top. Pull the 2 ends of the table top apart. STEP 6 Unfold the butterfly leaf with the apron at both ends straightened up as shown on the Step 6. Place flattened butterfly leaf at the center of the table. Then push two end pieces inward making sure all pins & holes aligned.