Product Manual

10
Cold Water Gas • Rev. 12/05/2017
4. Start the pump and engage trigger on the pressure gun. Operate the system until the fluid runs
the same color as the windshield washing fluid. Your machine is now prepared for storage.
5. Disconnect fluid supply, blow out with compressed air, and cap end.
GENERAL MAINTENANCE
Water Condition
Use a softener on your water system if local water is known to be high in mineral content. The
advantages of soft water are very beneficial: prevents scale buildup in heater coil, cleans better
with considerably less detergent, and prevents streaking on painted surfaces and glass when
rinsing.
MAINTENANCE CHECKLIST
Maintenance for Pump
Daily:
1. Check oil for proper level and adjust accordingly.
2. Examine the quality of the oil.
3. Check pump for oil and/or water leaks.
4. Inspect and clean inlet filters.
Weekly:
1. Examine all fittings, components, hoses, connections, and nozzles for damages, loose
parts, or leaks. – Replace accordingly—
Recommendation for Oil Changes and Component Replacement:
1. Change the oil in the pump after the first 50 hours and every 500 hours after the initial
oil change. Use SAE 30 W Non-Detergent for GP Pumps and Hydraulic 68 for EK
Pumps.
2. Change all other components on the pump as needed.