EasyN Quick Installation Guide Search for the free EasyN App on the App Store (Apple) or the Google play Store(Android) and install it EasyN
Home ip camera/cube camera wireless connection Wi-FI smart-config, applicable to home ip camera/cube camera IP Cam Internet Wireless Router Power Adapter Before adding camera, please follow below instructions: 1. C onnect the power adapter to the camera and the mains 2. Wait for the camera to play music(No music once network cable connected) 3.
Add and view the camera Launch the EasyN App, Select“ +”on the app home screen, Click“ Add camera” when the music is playing from the camera speaker.Click“Next” Note: WiFi smart configuration setup method does not work for all WiFi router configurations. Pls make sure this is a 2.
The App will connect to the same WiFi network as your smartphone/tablet,Enter your WiFi password and select “Advanced”. This will take around 1 minutes.Once the setup is complete music will stop playing from the cameras speaker and the“ LAN search” screen will show the camera UID.
The camera will show ”Online”once connected. you can refresh this page to check the camera connection status. Click”Online” to view the camera.
Network cable connection IP Cam Internet Wireless Router Power Adapter Manual Setup Outdoor cameras(Bullet/Dome cameras) must connect Ethernet cable for the first connection.Indoor cameras can also connect Ethernet cable for the first connection. Before adding camera, please follow below instructions: 1. C onnect the power adapter to the camera and the mains 2.
Add and view the camera Launch the EasyN App, Select“ +”on the app home screen, then select“ 3.
Selec“ t OK” to add the camera,The camera will show “Online”once connected. Click”Online” to view the camera. Click and enter 4 screens view, at the same time, you can view 4 cameras, move left and right, view another 4 cameras in the camera list.
Video interface, the function description Pan Tilt control option Listen option Zoom in/zoom out option Talk option Temperature and humidity display option Snapshot option Full Screen (Portrait) option Video recording option Full Screen (landscape) option Video quality option Reset video option Cruise option 4 screens option Preset position option Back to camera list option
Camera management 1、Password Manage Modify Password 2、 Image Settings The brightness 、Contrast setting Flip up and down Left and right mirror settings 、Infrared light switch setting 3、Event Settings To set Motion Detection on/off .
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.