Instructions

8
Using your gimbal
Your gimbal is designed for use in a variety of applications whether
you are at home or on the move.
To ensure your gimbal configures itself correctly for use, always place
your smartphone into the holder before switching the device on.
For best stabilization performance, when inserting the smartphone
into the clamp, always try to place it in the centre of the clamp for
the best balance.
The remote control can be used while attached to the handle when
the gimbal is being used like a selfie stick or alternatively, the remote
can be removed and used at a distance while the gimbal is placed on
a surface using the integrated tripod.
Step 1: Unfold the gimbal
• Open the screw cap.
• Unfold the gimbal and then close the screw cap.
• Move the smartphone holder to release it from the lock.
Step 2: Charging the gimbal
• Your gimbal can be charged using the micro USB cable
provided.
• Connect one end the cable to the micro USB port on the side
of the gimbal and the other end of the cable into a computer
or USB charger not exceeding 1,000mA output.
• The LED indicator confirms the battery is charging.