Operation Manual

28
EN
Section 6
Viewing Pictures and Movies on a TV
Connecting to a High-Denition 16:9(Wide) TV
Connect one end of the HDMI cable to your camera’s HDMI out port.1.
Connect the other end of the cable to a television.2.
Set video input source of a TV to “ HDMI” option.3.
Use direction button to view stored pictures and movie on a TV. 4.
Use Right/Left Buttons to go to the next or last movie/picture.1.
Press Movie Shutter Button to play movies and press it again to pause. 2.
While playing movies, press Right/Left Buttons to fast forward/rewind, then release the button to 3.
stop.
Use Up/Down Buttons to adjust volume.4.
In Picture Playback mode, 5. use Tele Button to magnify the picture. To navigate the magnied picture,
use Direction Buttons to navigate the magnied picture. Press Menu/OK Button to exit navigation
mode.
(16:9)
Note
ThecameracannotrunmovierecordingandpicturetakingwhenitisconnectedtoanHDTV.The
LCDPaneldoesnotdisplaywhenthecameraisconnectedtoanHDTV.
Connecting to a non-high-denition 4:3 TV
Connect one end of the AV cable to your camera’s AV out port.1.
Connect the other end of the cable to a television.2.
Use direction button to view stored pictures and movie on a TV. 3.
( 4 : 3 )
Note
TheLCDPaneldoesnotdisplaywhenthecameraisconnectedtoaTV.