Operation Manual

5
2. Preparing for using
Installing the Battery
1. Slide to open the battery cover.
2. Place the accessory li-ion battery into the
compartment. The metallic contacts must be aligned
with the contacts in the compartment.
3. Close the battery cover.
Charging the battery
a) Power OFF and connect the USB cable to the camcorder and the
computer for battery charging.
b) Charging starts when green charging LED turns on. The charge indicator
light turns OFF when charging is completed.
c) Disconnect the camcorder.
Inserting the Memory Card
This camcorder has no internal memory; please insert the memory card
before operating (This camcorder support SD/MMC card up to 32GB)