Operation Manual

8
7. Do not attempt to recharge ordinary batteries.
8. The supply terminals are not to be short-circuited.
9. Only batteries of the same and equivalent type as
recommended are to be used.
! Turning On/Off the Camera:
Press Power Button to turn on the camera. You can
see the startup screen on the LCD screen. Wait for a few
seconds until the LCD screen shows the image captured by
the lens.
If there is no memory card inserted in camera, the
LCD screen will show “Insert a SD Memory Card” as a
reminder.
To turn off your camera, press the Power Button again
and hold it (3 seconds) until the LCD screen shows “Good
Bye” and turns off.
The camera will automatically turn off if it is not used
for about 60 seconds.