Operation Manual

9
3.4 Power off the Scanner
After all originals were scanned, press and hold the power
button until the indicator blank. Now you can safely
disconnect the power and remove the memory card or flash
card from the scanner.
Important:
1. Insert only one photo at a time, and insert the next one
only when the previous one is done, and the indicator
light stops blinking. Otherwise, the scanner may
malfunction.
2. The acceptable paper size is 2”x 2” ~ 4” x 6”.
3. Do not use the following types of originals for scanning;
otherwise the scanner may malfunction or cause the
original to jam in the slot.
 Originals thicker than 0.5mm
 Originals with either side shorter than 50mm(below 2”)
 Originals with lots of black or dark colors
 Originals with dark colors surrounding the edges
 Transparencies(filmstrips, celluloid, etc.)
 Printed images (pictures on newspapers, magazines,
etc.)
 Soft and thin materials (thin paper, cloth, etc.)
 Originals that exceed or below the acceptable size
4. The scanner has a built-in cropping function that is
capable to detect and crop the edges of an original.