Operation Manual

Basic Settings

Upon turning the camera on, a “welcome image” will appear on the LCD

display. Please proceed with the following settings:

Language Preference Setting

13 laguages are available for selection in this camera. Please refer to

“Language” setting under “Setup”. (Page 20)

Date and Time Setting

Please refer to the “Date and Time” setting under setup function. (Page

19)

Formatting the Internal Memory and SD Card

1. Formatting SD Card

Prior to its initial usage, format the SD card. To format the SD card,

please insert your compatible SD card into SD slot. Then proceed

with the following steps:

1). Press “Menu” button in the “Capture” mode and select

“Formatting”.

2). Press “OK” button to confirm. The SD card will be formatted.

2. Formatting the Internal Memory

1). Take out SD card from the slot and format the Internal Memory by

following the above mentioned steps .

Note: To select a “Welcome Image”, users can select “Setup” in the

“Menu” in “Capture” mode.

NOTE: 1. Prior to formatting the SD card, deactivate the “Protect SD

card” function.

2. The internal memory cannot be formatted when the SD card is

in the camera.