Operation Manual

4
1.3 Installing the batteries and SD card
1.3.1 Installing the batteries
The camera uses 3 AAA 1.5V alkaline batteries.
 Slide the battery door according to the instructed
direction as shown and open it.
 Insert the batteries into the battery compartment.
(See page 22 for battery life)
1.3.2 Installing the SD card
 Insert the SD card according to the arrow direction
as shown. Push the memory card to the bottom of
the socket. Make sure the SD card is completely
inserted.
 Push the SD card inward according to the arrow
direction as shown to eject the SD card.
Note: When the camera is powered on, do not open the battery/SD card compartment.
Please remove the battery or the SD card when not using the camera for long period.
The pictures will be stored on the SD card if the card is inserted. When the SD card is
not inserted, the shot information will be temporarily stored in the SDRAM in the
camera. When the battery is removed, the information will disappear automatically.
Note: To improve performance, exhausted batteries should be replaced. If Ni-HM
rechargeable batteries are used, make sure they are fully recharged. Make sure that
the batteries are inserted in the battery compartment according to the correct polar