Operation Manual

Chapter 3 Taking still images or videos
13
Adjusting the camera settings using the camera buttons
Using the self-timer
The self-timer allows you to take hands-free pictures and videos
such as self portraits or group photos.
1. Turn the camera on. Make sure the camera is in Picture
mode.
2. Set the camera on a stable surface such as a tripod or table
and frame the picture.
3. Frame the picture, making any zoom or flash settings nec-
essary
4. The self-timer has two delay set-
tings.
Press the Right arrow once turn
on the self-timer with a two sec-
ond delay. The icon appears.
Press the Right arrow again to
set the delay to 10 seconds. The
icon appears.
5. Press the Shutter button. The
counter begins counting down
on the LCD. The LED on the front of the camera flashes
once a second to count down.
Note: To cancel the self timer, press the Right button until no icon is
displayed.
Taking sequences
You can take sequences of pictures very quickly one after the
other using the sequence setting. You can use this to make an
action series.
1. Turn the camera on. Make sure the camera is in Picture
mode.
2. Press the Right arrow three
times to turn on the Sequence
setting. The icon appears.
3. Frame the picture using the
LCD.
4. Press the Shutter button.